![\"Detenci\u00f3n](\"http:\/\/wordpress1.45.6.49.42.nip.io\/wp-content\/uploads\/2026\/10\/fs-1000x400-1.jpg\" "\\"fs\\"")
<\/div>\n<\/figure>\nWe are specialists in providing qualified, tested and approved systems for the widest variety of penetrating items and conditions, including head of wall, perimeter or expansion joint treatments. Every system we design is created to maintain the integrity of the wall or floor that\u2019s being penetrated.<\/p>\n
\u2022 Head of wall compartmentation
\n\u2022 Compounds
\n\u2022 Service penetration sealing
\n\u2022\u00a0Linear gap seals
\n\u2022\u00a0Slab Edge Firestopping
\n\u2022 Ablative Coated Batt
\n\u2022 Duct protection<\/p>\n
<\/span>Head of Wall Compartmentation<\/a><\/h3>\nWhen fire rated walls intersect the underside of a concrete deck, metal deck, or other fire rated floor\/ceiling assembly, the joint between the top-of-wall and floor\/ceiling must be firestopped to maintain the rating of the fire rated wall assembly.<\/p>\n
Saxon\u2019s extensive experience in passive fire protection enables us to give expert advice on choosing the most cost effective and most suited product for your project\u2019s needs.<\/p>\n
BENEFITS<\/p>\n
\n- Provides up to 4 hours protection<\/li>\n
- Acoustically absorbent<\/li>\n
- Suitable for penetration and linear joints<\/li>\n
- CE Marked<\/li>\n
- Both vertical and horizontal joint applications<\/li>\n
- Tested for durability to current EU guidelines<\/li>\n
- Supplied Pre-Coated FIRESTOP BLOCKS<\/li>\n<\/ul>\n
Linear and Trapezoidal Firestops, provide firestopping at the junctions of compartment walls and floors. Tested to BS476: Part 20: 1987, they provide up to 4 hours fire protection.<\/p>\n
<\/span>Service Penetration Sealing<\/a><\/h3>\nPenetration sealing is a term used to describe a wide variety of fire stopping systems. These have been approved to seal a gap thus ensuring a building\u2019s fire integrity and safety.<\/p>\n
Mechanical, electrical and structural components often pass through Fire Rated walls and floors, which can impair the structure\u2019s fire integrity. Often times, gaps can also be left from poor construction. This leaves a fire risk which needs to be mitigated.<\/p>\n
Every service is different and fire resistant building elements all react in different ways when exposed to fire. It is important to gain correct support from professional, experienced fire penetration installation experts. We have a long standing professionalism in the industry and are highly qualified in this field.<\/p>\n
<\/span>Linear Gap Sealing<\/a><\/h3>\nLinear Gap Seals are a range of Fire Proof Systems used to seal technological gaps within the fabric of the building. They are designed to stop the spread of fire while allowing the structure to expand and contract as engineered.<\/p>\n
The Advantages of Linear Gap Sealing are;
\n\u2022 Up to 4 hours fire rating.
\n\u2022 Intumescent is robust, therefore \u2018non-flaking\u2019 and is difficult to tear.
\n\u2022 It is unaffected by water.
\n\u2022 You can fill various gap sizes.
\n\u2022 It is suitable for internal or external application.<\/p>\n
<\/span>Ablative Coated Batt<\/a><\/h3>\nThe Ablative Coated Batt acts as an air seal barrier to reinstate the fire resistance and acoustic performances of concrete floors, masonry walls and dry wall systems, following the creation of voids for the passage of services.<\/p>\n
BENEFITS
\n\u2022 Up to 4 hours fire performance
\n\u2022 Lightweight and simple to install
\n\u2022 No maintenance required
\n\u2022 Tested for airtightness
\n\u2022 Fire compound
\n\u2022 Duct protection<\/p>\n
<\/span>Compound<\/a><\/h3>\nCompounds are used to provide a fire rated seal around service penetrations in fire rated walls and floors. Tested in accordance with BS 476:Part 22, PFC Compounds provide up to 6 hours fire protection.<\/p>\n
General benefits:<\/strong>
\n\u2022 Smoke seal
\n\u2022 Good acoustic insulation
\n\u2022 Simple installation
\n\u2022 Load bearing seal for maintenance and light foot traffic
\n\u2022 Suitable for making good around most types of service penetrations
\n\u2022 Unaffected by humidity
\n\u2022 Maintenance free
\n\u2022 No smoke emission
\n\u2022 Approved for use on London Underground projects<\/p>\nDescription<\/strong>
\nCompounds are a specially formulated gypsum based mortar, which is mixed with water to be trowelled or poured around service penetrations. Plastic pipework must be protected with either Collars or Intumescent Pipe Wraps (see technical data sheets). In floors, depending on the hole size, PFC Corofil permanent shuttering panel (50mm) is cut and friction fitted between services and the edges of the floor slab. Firestop Compound is then trowelled over the shuttering to a depth of 25mm thick and is allowed to harden. The Firestop Compound is then mixed to a pouring grade and tops the seal up to the required depth. In walls, Firestop Compound is mixed into a stiff consistency for trowelling into smaller openings. In larger openings, Firestop Compound may be cast into blocks which are built into walls.
\nSpecification
\nCompounds can provide up to 6 hours fire protection to all service penetrations through fire rated walls and floors. Installation to be fully in accordance with manufacturer\u2019s instructions.<\/p>\n
Linear and Trapezoidal Firestops, provide firestopping at the junctions of compartment walls and floors. Tested to BS476: Part 20: 1987, they provide up to 4 hours fire protection.<\/p>\n
<\/span>Service Penetration Sealing<\/a><\/h3>\nPenetration sealing is a term used to describe a wide variety of fire stopping systems. These have been approved to seal a gap thus ensuring a building\u2019s fire integrity and safety.<\/p>\n
Mechanical, electrical and structural components often pass through Fire Rated walls and floors, which can impair the structure\u2019s fire integrity. Often times, gaps can also be left from poor construction. This leaves a fire risk which needs to be mitigated.<\/p>\n
Every service is different and fire resistant building elements all react in different ways when exposed to fire. It is important to gain correct support from professional, experienced fire penetration installation experts. We have a long standing professionalism in the industry and are highly qualified in this field.<\/p>\n
<\/span>Linear Gap Sealing<\/a><\/h3>\nLinear Gap Seals are a range of Fire Proof Systems used to seal technological gaps within the fabric of the building. They are designed to stop the spread of fire while allowing the structure to expand and contract as engineered.<\/p>\n
The Advantages of Linear Gap Sealing are;
\n\u2022 Up to 4 hours fire rating.
\n\u2022 Intumescent is robust, therefore \u2018non-flaking\u2019 and is difficult to tear.
\n\u2022 It is unaffected by water.
\n\u2022 You can fill various gap sizes.
\n\u2022 It is suitable for internal or external application.<\/p>\n
<\/span>Ablative Coated Batt<\/a><\/h3>\nThe Ablative Coated Batt acts as an air seal barrier to reinstate the fire resistance and acoustic performances of concrete floors, masonry walls and dry wall systems, following the creation of voids for the passage of services.<\/p>\n
BENEFITS
\n\u2022 Up to 4 hours fire performance
\n\u2022 Lightweight and simple to install
\n\u2022 No maintenance required
\n\u2022 Tested for airtightness
\n\u2022 Fire compound
\n\u2022 Duct protection<\/p>\n
<\/span>Compound<\/a><\/h3>\nCompounds are used to provide a fire rated seal around service penetrations in fire rated walls and floors. Tested in accordance with BS 476:Part 22, PFC Compounds provide up to 6 hours fire protection.<\/p>\n
General benefits:<\/strong>
\n\u2022 Smoke seal
\n\u2022 Good acoustic insulation
\n\u2022 Simple installation
\n\u2022 Load bearing seal for maintenance and light foot traffic
\n\u2022 Suitable for making good around most types of service penetrations
\n\u2022 Unaffected by humidity
\n\u2022 Maintenance free
\n\u2022 No smoke emission
\n\u2022 Approved for use on London Underground projects<\/p>\nDescription<\/strong>
\nCompounds are a specially formulated gypsum based mortar, which is mixed with water to be trowelled or poured around service penetrations. Plastic pipework must be protected with either Collars or Intumescent Pipe Wraps (see technical data sheets). In floors, depending on the hole size, PFC Corofil permanent shuttering panel (50mm) is cut and friction fitted between services and the edges of the floor slab. Firestop Compound is then trowelled over the shuttering to a depth of 25mm thick and is allowed to harden. The Firestop Compound is then mixed to a pouring grade and tops the seal up to the required depth. In walls, Firestop Compound is mixed into a stiff consistency for trowelling into smaller openings. In larger openings, Firestop Compound may be cast into blocks which are built into walls.
\nSpecification
\nCompounds can provide up to 6 hours fire protection to all service penetrations through fire rated walls and floors. Installation to be fully in accordance with manufacturer\u2019s instructions.<\/p>\n
Linear Gap Seals are a range of Fire Proof Systems used to seal technological gaps within the fabric of the building. They are designed to stop the spread of fire while allowing the structure to expand and contract as engineered.<\/p>\n
The Advantages of Linear Gap Sealing are;
\n\u2022 Up to 4 hours fire rating.
\n\u2022 Intumescent is robust, therefore \u2018non-flaking\u2019 and is difficult to tear.
\n\u2022 It is unaffected by water.
\n\u2022 You can fill various gap sizes.
\n\u2022 It is suitable for internal or external application.<\/p>\n
<\/span>Ablative Coated Batt<\/a><\/h3>\nThe Ablative Coated Batt acts as an air seal barrier to reinstate the fire resistance and acoustic performances of concrete floors, masonry walls and dry wall systems, following the creation of voids for the passage of services.<\/p>\n
BENEFITS
\n\u2022 Up to 4 hours fire performance
\n\u2022 Lightweight and simple to install
\n\u2022 No maintenance required
\n\u2022 Tested for airtightness
\n\u2022 Fire compound
\n\u2022 Duct protection<\/p>\n
<\/span>Compound<\/a><\/h3>\nCompounds are used to provide a fire rated seal around service penetrations in fire rated walls and floors. Tested in accordance with BS 476:Part 22, PFC Compounds provide up to 6 hours fire protection.<\/p>\n
General benefits:<\/strong>
\n\u2022 Smoke seal
\n\u2022 Good acoustic insulation
\n\u2022 Simple installation
\n\u2022 Load bearing seal for maintenance and light foot traffic
\n\u2022 Suitable for making good around most types of service penetrations
\n\u2022 Unaffected by humidity
\n\u2022 Maintenance free
\n\u2022 No smoke emission
\n\u2022 Approved for use on London Underground projects<\/p>\nDescription<\/strong>
\nCompounds are a specially formulated gypsum based mortar, which is mixed with water to be trowelled or poured around service penetrations. Plastic pipework must be protected with either Collars or Intumescent Pipe Wraps (see technical data sheets). In floors, depending on the hole size, PFC Corofil permanent shuttering panel (50mm) is cut and friction fitted between services and the edges of the floor slab. Firestop Compound is then trowelled over the shuttering to a depth of 25mm thick and is allowed to harden. The Firestop Compound is then mixed to a pouring grade and tops the seal up to the required depth. In walls, Firestop Compound is mixed into a stiff consistency for trowelling into smaller openings. In larger openings, Firestop Compound may be cast into blocks which are built into walls.
\nSpecification
\nCompounds can provide up to 6 hours fire protection to all service penetrations through fire rated walls and floors. Installation to be fully in accordance with manufacturer\u2019s instructions.<\/p>\n
\n\u2022 Up to 4 hours fire performance
\n\u2022 Lightweight and simple to install
\n\u2022 No maintenance required
\n\u2022 Tested for airtightness
\n\u2022 Fire compound
\n\u2022 Duct protection<\/p>\n
Compounds are used to provide a fire rated seal around service penetrations in fire rated walls and floors. Tested in accordance with BS 476:Part 22, PFC Compounds provide up to 6 hours fire protection.<\/p>\n
General benefits:<\/strong> Description<\/strong>
\n\u2022 Smoke seal
\n\u2022 Good acoustic insulation
\n\u2022 Simple installation
\n\u2022 Load bearing seal for maintenance and light foot traffic
\n\u2022 Suitable for making good around most types of service penetrations
\n\u2022 Unaffected by humidity
\n\u2022 Maintenance free
\n\u2022 No smoke emission
\n\u2022 Approved for use on London Underground projects<\/p>\n
\nCompounds are a specially formulated gypsum based mortar, which is mixed with water to be trowelled or poured around service penetrations. Plastic pipework must be protected with either Collars or Intumescent Pipe Wraps (see technical data sheets). In floors, depending on the hole size, PFC Corofil permanent shuttering panel (50mm) is cut and friction fitted between services and the edges of the floor slab. Firestop Compound is then trowelled over the shuttering to a depth of 25mm thick and is allowed to harden. The Firestop Compound is then mixed to a pouring grade and tops the seal up to the required depth. In walls, Firestop Compound is mixed into a stiff consistency for trowelling into smaller openings. In larger openings, Firestop Compound may be cast into blocks which are built into walls.
\nSpecification
\nCompounds can provide up to 6 hours fire protection to all service penetrations through fire rated walls and floors. Installation to be fully in accordance with manufacturer\u2019s instructions.<\/p>\n