Intumescent Pipe Sleeve
FP160 is a steel encased closer device for combustible pipes of up to 200 mm. Available in various lengths, it is the perfect solution for angled pipes. FP160 provides service integrity of up to 4 hours, dependant on substrate. It may be used directly in solid or flexible substrates, or within FB750 coated batts. Additional clips may be required in floors slabs.
Used to seal combustible pipes as they pass through fire compartment walls and floors. When exposed to fire, the intumescent lining within the metal sleeve expands and fills the space left by the heat softened pipe thus reinstating the fire compartment line.
The product is suitable for retrofit or maybe installed prior to service installation. When used as a multibox or cable closer, foam smoke seals should be requested.
Benefits of Intumescent Pipe Sleeves
• Ultra-slim body design ensures easy installation in awkward situations – reduces time on site
• Less obtrusive than externally fitted fire collars – better aesthetics
• Tested to 2 hours integrity and insulation walls and 4 hours integrity and insulation when used within FR230 fire resistant compound floor seals
Intumescent Pipe Collars
FP170 Intumescent Pipe Collars are designed to maintain the fire resistance of floors and walls when penetrated by combustible pipes. Under fire conditions, the intumescent filler expands to many times its original thickness exerting pressure on the softening pipe and closing the opening with a dense block of fire resistant char. FP170 may additionally be used around insulated combustible pipes or continuously insulated non-combustible pipes.
Benefits of Intumescent Pipe Collars
• Suitable for use with a wide range of plastic, metal and insulated pipes
• Can be used for applications in walls and floors
• Simple to use, one-piece design saves time on site
• Water resistant
• Non-corrosive: inert product
Intumescent Pipe Wrap
FP300 is a simple to use self-adhesive intumescent pipe wrap used for sealing plastic and composite pipe penetrations.
FP300 is used to stop the spread of smoke and fire along services that pass through compartment walls and floors. The wrap fits around the circumference of the pipe within the depth of the substrate. In the event of a fire FP300 prevents the passage of fire and smoke by closing off the aperture within the compartment floor or wall when penetrated by plastic pipes.
FP300 is suitable for use with all common plastic and composite pipes.
Typical areas of use include health and leisure facilities, schools, universities, commercial, retail and industrial buildings.
Benefits of intumescent pipe wrap
• Provides an effective barrier to the spread of smoke and fire for up to 2 hours
• Ready to use, and easy to install. No mechanical fixing required